UHO Outdoor Camera Housings
- Protects camera/lens combinations up to 262 mm (10.32 inch) in length
- Hinged side opening for easy installation and camera setup
- Sunshield included
- Heater and window defroster
The UHO camera housings are smartly styled enclosures that enable you to use the DINION family of cameras in an outdoor environment or in areas where the cameras need to be protected. Models are available for use with 24 VAC, 120 VAC, and 230 VAC power supplies. Depending on the version, they can be used with 12 VDC, 24 VAC, 120 VAC, and 230 VAC cameras.
| Dimensions (H x W x L) | 126.5 x 171.3 x 480 mm (5 x 6.7 x 18.9 in.) including sunshield |
| Weight | 3.1 kg (6.8 lb) |
| Weight (with blowers) | 3.2 kg (7.1 lb) |
| Construction | Aluminum casing, silicone gaskets, all stainless steel hardware |
| Color | Gray |
| Window | 3 mm (0.12 in) glass |
| Locking clasps | Tamper-resistant screws provided |
| Camera mounting | Removable camera/lens tray, mounted with two screws |
| Max. camera + lens size (H x W x L) | 91 x 81 x 262 mm (3.6 x 3.2 x 10.3 in) |
| Mounting holes | 2x pair of 1/4-20 tapped holes inner pair: 51 mm (2.0 in) center-to-center outer pair: 73 mm (2.9 in) center-to-center |
| Housing Voltage supply | 11 models: 24 VAC nominal (50/60 Hz) 51 models: 230 VAC nominal (50 Hz) 61 model: 120 VAC nominal (60 Hz) |
| Housing power consumption | With blower: 45 W Without blower: 40 W |
| Maximum camera power consumption | 10 W |
| Rear fittings | 1x cable diameter: 5.5 to 8 mm (0.14 to 0.32 in) 2x cable diameter: 5.8 to 10 mm (0.23 to 0.39 in) |
| Bottom feeds | 2x cable diameter: 4.5 to 7.9 mm (0.18 to 0.31 in) |
| Rear connectors | 1x 4-pin (power) 1x BNC (video) |
| Operating temperature - external | -40 °C to +50 °C (‑40 °F to +122 °F) |
| Operating temperature – internal1 | -20 °C to +55 °C (‑4 °F to +131 °F) |
| Enclosure protection2 | IP66 |
| NEMA TS 2-2003 (R2008), para 2.1.5.1 using fig. 2.1 test profile | -34 ºC to +74 ºC (-30 ºF to +165 ºF) |