UHO-POE-10 Outdoor housing, PoE + power supply

UHO-POE-10 Outdoor housing, PoE + power supply

  • Protects camera/lens combinations up to 268 mm (10.6 inch) in length
  • Stylish and sturdy housing (IP67; NEMA 4x)
  • PoE power input for single cable installation
  • Hinged side opening for easy installation and camera setup
  • Heater

The PoE camera housing is a smartly styled enclosure that enables you to use a DINION camera in an outdoor or indoor environment, or in areas where the camera needs to be protected. This housing is supplied with power via the PoE Ethernet connection or, alternatively, via a separate a 12 VDC power supply.

 
Dimensions (H x W x L) 141 x 164 x 430 mm (5.6 x 6.5 x 16.9 in.) including sunshield
Weight 2.2 kg (4.9 lb)
Construction Aluminum casing, silicone gaskets, all stainless steel hardware
Color Gray
Window 3 mm (0.12 in) glass
Locking clasps Tamper-resistant screws provided
Camera mounting Removable camera/lens tray, mounted with two screws
Max. camera + lens size (H x W x L) 70 x 80 x 268 mm (2.8 x 3.2 x 10.6 in)
Mounting holes 2x pair of 1/4-20 tapped holes inner pair: 51 mm (2.0 in) center-to-center outer pair: 74 mm (2.9 in) center-to-center
   
Power supply Power-over-Ethernet Plus (PoE+) IEEE 802.3at, 48 VDC nominal; or 12 VDC (switchable)
Power consumption (housing only) 14 W max.
Power handling (housing + camera) 30 W max.
Operating temperature - external -30 °C to +50 °C (‑22 °F to +122 °F)
Operating temperature – internal1 -20 °C to +50 °C (‑4 °F to +122 °F)
Enclosure protection2 IP67, NEMA-4X
NEMA TS 2-2003 (R2008), para 2.1.5.1 using fig. 2.1 test profile -34 ºC to +74 ºC (-30 ºF to +165 ºF)