Photobeam 5000

Photobeam 5000

  • Quad beam detection
  • Environmental discrimination circuit
  • Beam power control to reduce cross-talk

The Photobeam 5000 Series consists of the single channel quad beam ISC-FPB1-W60QS, ISC-FPB1- W120QS, ISC-FPB1-W200QS, and the four channel quad beam ISC-FPB1-W60QF, ISC-FPB1-W120QF, and ISC-FPB1-W200QF detectors with separate transmitters and receivers. The detector series uses four pulsed infrared beams that are designed to activate an alarm when all four beams are simultaneously blocked. False alarm immunity is increased by the utilization of four beams compared to single or dual beam models. The detector series also features interlocked upper and lower beams, signal voltage LED, and optional environmental discrimination circuitry.

   
Operating temperature -25°C to +60°C (-13°F to +140°F) (96% or less)
Storage temperature/humidity -30°C to +70°C (-22°F to +158°F) Relative Humidity 96%
IP rating (indoor) IP66
   
Location Pole mount or surface mount
Horizontal adjustability ±90°
Vertical adjustability ±10°
Distance between upper and lower lens 245 mm (9.64 in)
   
Dimensions 103 mm x 398 mm x 99 mm (4.05 in x 15.66 in x 3.89 in)
Voltage 10.5 VDC to 28 VDC.
Alarm output Form C relay (COM, NC, NO) (dry contact)
Duration – 2 sec  
Contact capacity – DC30V, 0.2A (resistive load)
Resistance – 3.0 Ω or less  
Tamper output Form B, normally closed relay (dry-contact)
Duration – Open when cover is open  
Contact capacity – DC30V, 0.1A (resistive load)  
Resistance - 3.0 Ω or less  
EDC output Form B, normally closed relay (dry-contact)
Duration – Open when EDC is active  
Contact capacity - DC30V, 0.2A (resistive load)  
Resistance - 3.0 Ω or less  
   
Interruption time 40 ms – 500 ms (adjustable)