MIC Series IP Power Supply

MIC Series IP Power Supply

  • MIC power supply with IVA-enabled, integrated Bosch IP technology provides video and control over IP for MIC550, MIC550IR, and MIC612 cameras.
  • Easy-to-install, IP67-rated enclosure has high tolerance to vibration/shock for both indoor and outdoor installations.
  • Supports optional, user-installed Bosch Ethernet fiber optic.
  • NTCIP and ONVIF conformant encoder; integrates with transportation management devices and provides interoperability with other conformant systems.
  • Local storage on SD or SDHC card (32 GB maximum) for flexible recording options.

A full range of MIC Series power supply units (PSUs), with integrated Bosch IP technology and built-in support for NTCIP protocol, provides all connections for power, telemetry and video for MIC Series MIC550, MIC550IR, and MIC612 cameras. These MIC IP PSUs ensure that the cameras can be installed in a variety of locations, including low voltage and mobile applications. They conform to the National Transportation Communications for ITS Protocol (NTCIP) specification. NTCIP conformance ensures that the MIC IP PSU integrates with transportation management devices.

   
MIC Camera models MIC IP PSU (Non-IR models) , MIC IP PSU (IR models)
MIC550 X
MIC550 IR X
MIC612 X
   
Model Voltage / Power @ 50/60 Hz , Applicable Cameras
Non-IR IP Power Supply Units  
MIC-IP-PS-24 Input: 24 VAC ± 10%Consumption: 2.0 A , MIC550, MIC612
MIC-IP-PS-115 Input: 115 VAC ± 10%Consumption: 400 mA
MIC-IP-PS-230 Input: 230 VAC ± 10%Consumption: 200 mA
IR IP Power Supply Units  
MIC-IPIR-PS-24 Input: 24 VAC ± 10%Consumption: 3.3 A , MIC550IR
MIC-IPIR-PS-115 Input: 115 VAC ± 10%Consumption: 750 mA
MIC-IPIR-PS-230 Input: 230 VAC± 10% Consumption: 350 mA
   
Dimensions (L x W x H) 330 mm x 250 mm x 90.75 mm(13 in. x 9.84 in. 3.57x in.)
Form Factor (four screw holes) 11.19  mm (0.44 in.)
Weight Non-IR PSUs: 7.21 kg (15.9 lb)IR PSUs: 7.3 kg (16.1 lb)
Material Powder-coated cast aluminum, rated IP67
Color RAL 9010 (Pure White) with sand finish
Optional add-ons(each sold separately) MIC-ALM (8-input alarm card)MIC-WKT (washer kit used with optional washer pump, purchased separately)MIC-WKT-IR (washer kit, with integrated four-input alarm terminal for IR models, used with optional washer pump, purchased separately)VG4‑SFPSCKT Fiber Optic Ethernet Media Converter Kit
   
Alarm Inputs/Outputs  
IP Encoder Video Input(all models) Supports 1 video input- Recommended in order to use the switched video output for MIC thermal cameras.
- Non-IR, without expansion card Supports 1 tamper input.
- Non-IR, with expansion card Supports 8 inputs, 2 outputs.
- IR models Supports 4 inputs.
   
Operating Temperature Non-IR models: -40 °C to +60 °C(-40 °F to +140 °F) IR models: -40 °C to +50 °C(-40 °F to +122 °F)
Storage Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Cold Start -30 °C(Requires 30-minute warm-up period after applying power before operation.)
   
Camera Setup/Control Via Internet Explorer Web browser version 7.0 or later or BVMS
Software Update Firmware upload
   
Storage One (1) SD card slot (for an SD or an SDHC card, user-supplied) with card capacity up to 32 GB
Standards H.264 (ISO/IEC 14496‑10), M‑JPEG, JPEG
Streaming A total of four (4) independent streams: Two (2) individually configurable H.264 streams at 4CIF/D1 resolution, One (1) H.264, I-frame only stream (suitable for recording) One (1) M‑JPEG stream at 4CIF/D1 resolution
GOP Structure IP, IBP, IBBP
Data Rate 9.6 kbps to 6 Mbps
Overall IP Delay 240 ms
Resolution (Horizontal x Vertical, PAL/NTSC)  
- 4CIF/D1 704 x 576/480 (50/60 ips)Depending on picture content and movement
- CIF 352 x 288/240 (50/60 ips4)
Ethernet 10-Base T/100 Base-TX, auto-sensing, half/full duplex, RJ45
Protocols RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS, FTP, DHCP, IGMP V2/V3, ICMP, ARP, SMTP, SNTP, SNMP v3, RTSP, 802.1x, iSCSI, DynDNS, UPnP, IP v4/6, QoS, SSH, SSL
Encryption TLS 1.0, SSL, AES (license option)
NTCIP Protocols  
- CCTV Camera Control NTCIP 1205
- Application Layer SNMP per NTCIP 1101:1996 & NTCIP 2301
- Transport/Network Layers TCP/IP per NTCIP 2202:2001
- Sub-network Layer PMPP (Point to Multi-Point Protocol) per NTCIP 2101:2001 & NTCIP 2102:2003
Audio 1 x 3.5mm stereo socket
- Standard G.711, 8 kHz sampling rateL16, 16 kHz sampling rate
- Signal-to-Noise Ratio >50 dB
- Audio Streaming Full Duplex / Half Duplex
   
Description Fiber Optic Ethernet Media Converter kit (sold separately and user-installed inside the power supply enclosure)See the datasheet for the VG4‑SFPSCKT Fiber Optic Ethernet Media Converter Kit for technical specifications and other product details.
Data Interface Ethernet
Data Rate 10/100 MbpsIEEE 802.3 CompliantFull Duplex or Half Duplex Electrical PortFull Duplex Optical Port
Compatible Receiver CNFE2MC