VIDEOJET decoder 3000

VIDEOJET decoder 3000

  • HD 1080p30/i60 or 720p60 decoding in single view
  • Quad-view option for SD video up to 960H
  • HDMI or composite video output
  • Bi-directional audio and keyboard support
  • Alarm inputs and relay output

VIDEOJET decoder 3000 displays H.264 encoded video at up to 60 images per second from PAL, NTSC, or HD sources over IP networks. Establish the video connections automatically from the camera, encoder, decoder, or Bosch’s comprehensive video management system. VIDEOJET decoder 3000 is capable of decoding a single HD video stream, or up to four SD video streams at the same time in quad-mode. Control the viewing mode remotely via a management system. It can drive an HD monitor via HDMI directly, thus is ideally suited for applications like flat-screen monitor walls. Alternatively, it can connect to an analogue monitor using its composite video BNC output. VIDEOJET decoder 3000 provides one-channel bidirectional audio communication in parallel to video. Ultra-compact in size, VIDEOJET decoder 3000 is perfect for any application that depends on spacesaving solutions.

Input/output  
Digital video 1 x output
standard HDMI 1.4b
video modes PAL, 704 x 576i @ 50 Hz NTSC, 704 x 480i @ 59.97 Hz 960H25, 960 x 576i @ 50 Hz 960H30, 960 x 480i @ 59.97 Hz 720p50, 1280 x 720p @ 50 Hz 720p60, 1280 x 720p @ 60 Hz 1080i50, 1920 x 1080i @ 50 Hz 1080i60, 1920 x 1080i @ 60 Hz 1080p25, 1920 x 1080p @ 25 Hz 1080p30, 1920 x 1080p @ 30 Hz
connector Type A
cable length 30 m (98.43 ft) max
Composite video 1 x output
connector BNC
impedance 75 ohm
signal Analog composite, 1 Vpp, NTSC or PAL
cable length 30 m (98.43 ft) max
Audio 1 x bidirectional
connector 2 x 3.5 mm stereo jack
signal line in 9 kohm typical, 5.5 Vpp max
signal line out 3.0 Vpp at 10 kohm / 1.7 Vpp at 16 ohm typical
Alarm 4 x input
connector Clamp (non-isolated closing contact)
activation resistance 10 ohm max
Relay 1 x output
connector Clamp
signal 30 Vpp (SELV), 200 mA
COM port Clamp, RS‑232/422/485, bidirectional
Video  
Standards H.264 High Profile, H.264 Main Profile, H.264 Baseline Profile (ISO/IEC 14496‑10) M-JPEG, JPEG
Data rates 9.6 kbps to 10 Mbps per channel
Total delay 300 ms max
Frame rate 1 to 25/30 (PAL/NTSC) 1 to 50/60 (HDMI)
Audio  
G.711  
Frequency range 300 Hz to 3.4 kHz
Data rate 80 kbps at 8 kHz sampling rate
L16 (reception only)  
Frequency range 300 Hz to 6.4 kHz
Data rate 640 kbps at 16 kHz sampling rate
Signal-to-noise ratio > 50 dB
Network  
Ethernet 10/100 Base‑T, auto-sensing, half/full duplex, RJ45
Protocols IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, Telnet, ARP, DHCP, APIPA (Auto-IP, link local address), NTP (SNTP), SNMP (V1, MIB-II), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, no-ip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, digest authentication
Encryption TLS 1.0, SSL, DES, 3DES, AES
Control  
Software update Flash ROM, remote programmable
Configuration Configuration Manager or Web browser
Electrical  
Power supply Via external unit
Input voltage 12 VDC
Input current 0.75 A
Power consumption Approx. 9 W
Mechanical  
Dimensions (H x W x D) 38 x 146 x 183 mm (1.5 x 5.7 x 7.2 in)
Weight Approx. 0.6 kg (1.3 lb)
Environmental  
Operating temperature  
Decoder 0 °C to +50 °C (+32 °F to +122 °F) ambient temperature
Power supply 0 °C to +40 °C (+32 °F to +104 °F) ambient temperature
Relative humidity  
Decoder 0 to 90% atmospheric humidity, non-condensing
Power supply 20 to 80% atmospheric humidity, non-condensing
Thermal value 31 BTU/h max