VideoJet X20/X40 XF E H.264 Video Encoder

VideoJet X20/X40 XF E H.264 Video Encoder

  • High-quality H.264 video over IPv4 and IPv6
  • Bandwidth-friendly adaptive bit rate encoding
  • Transcoding at the edge for advanced remote replay
  • Network-attached RAID storage via iSCSI
  • Local recording on CF card
  • ONVIF conformant

The VideoJet X20/X40 XF E encoders belong to a family of high-performance, dual- or quad-input CCTV video encoders by Bosch that deliver real-time H.264 compressed video over IPv4 and IPv6 networks. The units provide two independent streams per camera with full frame rate at best quality for different purposes, like one stream for live viewing with lowest delay while the second stream is optimized for requiring only little recording space. The VideoJet X20/X40 XF E encoders support PAL and NTSC sources and provide bidirectional audio communication in parallel to video. They are built into a housing that can be easily rack- or wall-mounted. These powerful and flexible devices represent the cutting edge of high-performance video-over-IP for CCTV today.

Input/output  
Video X20: 2 x input
X40: 4 x input  
connector BNC
impedance 75 ohm, switchable
signal Analog composite, 0.7 to 1.2 Vpp, NTSC or PAL
Audio 2 x mono line in, 1 x mono line out
connector 2 x 3.5 mm stereo jack
signal line in 9 kohm typical, 5.5 Vpp max
signal line out 3.0 Vpp at 10 kohm / 1.7 Vpp at 16 ohm typical
Alarm 4 x input
connector Clamp (non-isolated closing contact)
activation resistance 10 ohm max
Relay 1 x output
connector Clamp
signal 30 Vpp (SELV), 200 mA
COM port Clamp, RS‑232/422/485
Video  
Standards H.264 Main Profile, H.264 Baseline Profile (ISO/IEC 14496‑10)
Data rates 9.6 kbps to 6 Mbps per channel
Resolution Horizontal x vertical PAL/NTSC
4CIF/D1 704 x 576/480 (25/30 ips)
CIF 352 x 288/240 (25/30 ips)
GOP structure I, IP, IPBB, IBBRBP
Overall IP delay 120 ms
Frame rate 1 to 25/30 (PAL/NTSC)
Audio  
AAC  
Profile AAC-LC
Frequency rate 300 Hz to 6.4 kHz
Data rate 48/80 kbps at 16 kHz sampling rate
G.711  
Frequency rate 300 Hz to 3.4 kHz
Data rate 80 kbps at 8 kHz sampling rate
L16  
Frequency rate 300 Hz to 6.4 kHz
Data rate 640 kbps at 16 kHz sampling rate
Signal-to-noise ratio > 50 dB
Network  
Ethernet 10/100 Base‑T, auto-sensing, half/full duplex, RJ45
Protocols IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, APIPA (Auto-IP, link local address), NTP (SNTP), SNMP (V1, MIB-II), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, no-ip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, digest authentication
Encryption TLS 1.0, SSL, DES, 3DES, AES
Control  
Software update Flash ROM, remote programmable
Configuration Configuration Manager or web browser
Camera control Via serial interface; supported* protocols and devices:
Bosch AUTODOME, HSPT, MIC1‑300 IP, TC8x00
Canon VCC1, VC-C4R
CBC SMD 12P/12PII/20P
JVC TK-C676
Panasonic WV-CS850
Pelco Spectra D/P
Sensomatic SpeedDome Ultra
Sony EVI D30/31/D100
Ultrak KD6
VT VPT4x
* Basic functions only, no claim for full functionality valid. Bosch may not be made responsible if functions are not implemented or not working under all circumstances.  
Storage medium  
CompactFlash 1 x CF slot for optional standard Type I/II CompactFlash memory card, 2 TB
Electrical
Power supply Via external unit
Input voltage 12 VDC
Current consumption 0.75 A
Power consumption Approx. 9 W
Mechanical  
Dimensions (H x W x D) 38 x 146 x 183 mm (1.5 x 5.7 x 7.2 in)
Weight Approx. 0.6 kg (1.3 lb)
Environmental  
Operating temperature 0 °C to +50 °C (+32 °F to +122 °F) ambient temperature
Relative humidity 0 to 90% atmospheric humidity, non-condensing
Thermal value 31 BTU/h max, fully equipped