FLM-325-2R4-A Dual Relay Modules

FLM-325-2R4-A Dual Relay Modules

  • Two independently configurable Form C contacts
  • Contacts are rated 1 A at 30 VDC or 0.5 A at 125 VAC
  • Module address programming with the D5070 Analog Device Programmer
  • Bi‑colored LED provides module status
  • Digital data communications and power over a two‑wire circuit

The modules provide two independently controlled Form C contacts while utilizing only one address point at the Signaling Line Circuit (SLC). The two Form C contacts can be used for a variety of Normally Open and Normally Closed applications such as fan, elevator and door control, or auxiliary notification. As the modules use mechanically latching relays, a separate 24 VDC power supply is not required. They fit into a standard 4‑inch square or double‑gang electrical back box.

 
Current Consumption  
SLC: 0.405 mA
SCI Isolation: 10 mA typical
Relay Contact Ratings  
FLM‑325‑2R4‑2A: 2 A at 30 VDC, 1 pF; or 0.5 A at 120 VAC, 0.6 pF
FLM‑325‑2R4‑8A: 8 A at 30 VDC, 1 pF or 250 VAC resistive; or 4.8 A at 250 VAC, 0.6 pF
Voltage  
Operating: 24 VDC to 39 VDC
SLC Applied: 25.5 VDC to 39 VDC
   
Operating Temperature: +32°F to +120°F (0°C to 49°C)
Relative Humidity: Up to 90%, non‑condensing
   
Dimensions (H x W x D): 4.7 in. x 4.2 in. x 0.85 in. (11.9 cm x 10.7 cm x 2.16 cm)
Bicolored LED: Red and green
Contacts: Two Form C