The DX2010 Input Expander connects directly to the data bus of a compatible control panel. Each expander adds eight input loops. Install up to five expanders in a control panel's enclosure (three on the interior sidewalls and two on the back wall of the enclosure).
|Outputs||100 mA, 12 VDC supervised output for accessories|
|Operating temperature||0°C to +50°C (+32°F to +122°F)|
|Relative humidity||5% to 85% at +30°C (+86°F), non‑condensing|
|Inputs||Up to eight inputsInput contacts may be normally‑open (NO) or normally‑closed (NC) with appropriate end-of-line resistor(s) for supervision.|
|Terminal wire size||1.8 mm (14 AWG) to 0.8 mm (22 AWG)|
|Current (maximum)||35 mA standby 35 mA maximum with connected accessories|
|Voltage (operating)||8 VDC to 14 VDC|