B426 Ethernet Communication Module

B426 Ethernet Communication Module

  • Full two-way IP event reporting with remote control panel programming support
  • 10/100 Base-T Ethernet communication for IPv6 and IPv4 networks
  • NIST-FIPS197 Certified for 128-bit to 256-bitAES Encrypted Line Security
  • Plug and Play installation, including UPnP service to enable remote programming behind firewalls
  • Advanced configuration by browser, RPS, or A-Link

The B426 Conettix Ethernet Communication Module is a four-wire powered SDI, SDI2, and Option bus device that provides two-way communication with compatible control panels over IPv4 or IPv6 Ethernet networks. Typical applications include: • Reporting and path supervision to a Conettix Communications Receiver/Gateway. • Remote administration and control with Remote Programming Software or A-Link. • Connection to building automation and integration applications. The B426 is built for a wide variety of secure commercial and industrial applications. Flexible endto-end path supervision, AES encryption, and antisubstitution features make B426 desirable for high security and fire monitoring applications. It is capable as a stand-alone path or it can be used in conjunction with another communication technology. For Fire Monitoring applications, the B426 meets UL864 and NFPA72 standards for Single Communication Technology with approved Bosch control panels.

Relative humidity Up to 93% non-condensing
Temperature (operating) 0° - +49°C (+32° - +120°F)
   
Board dimensions 59.5 mm x 108 mm x 16 mm (2.19 in x 4.25 in x 0.629 in)
   
Current (maximum) 100 mA max
Voltage 12 VDC nominal
   
LAN/WAN RJ-45 modular port (Ethernet)
   
Ethernet cable Category 5 or better unshielded twisted pair
Ethernet cable length 100 m (328 ft) max length
   
Data bus wire gauge 18 AWG or 22 AWG
Data bus wire length Maximum distance – Wire size : 150 m (500 ft) - 0.65 mm (22 AWG) 300 m (1000 ft) - 1.02 mm (18 AWG)