AMC2 - Access Modular Controller

AMC2 - Access Modular Controller

  • Intelligent access manager for one to eight entrances
  • Four interfaces include the reader power supply
  • Standard 2 GB compact flash
  • LCD display for displaying information
  • Individual electronic verification of plugs and outputs
  • Input for an externally connected tamper contact

The AMC2 (Access Modular Controller) is used as an access controller in the access control systems ACE (ACCESS ENGINE) from version 2.0 onward, Access Personal Edition, and Access Professional Edition. The device controls a group of one to eight access points. These access points, also known as entrances, mainly consist of doors, gates, barriers, turn stiles, revolving doors, mantraps, ID card readers, door opening elements and sensors. The AMC2 can control up to eight ID card readers (depending on the reader type) and is designed for fully processing the access logic at the assigned entrances.

Hardware CPU RENESAS M32C84 Integrated Microcontroller (32Bit, 30MHz)
512 kB-EPROM/FLASH  
256 kB-SRAM  
Serial EEPROM  
RTC  
Pluggable 2 GB compact flash  
Battery for SRAM and RTC  
Host address can be set via sliding switch  
Host interface:- RS485 (2- or 4-wire); opto-decoupled- RS232- Ethernet 10/100BaseT (TCP/IP) with RJ45  
4 reader interfaces:- Wiegand or- RS-485, 2-wire, opto-coupled, 19.200 Bd  
8 relay outputs:- max. switching voltage: 30 V DC- max. switching current: 1,25 A  
8 monitored analog inputs  
Tamper switch  
Reset button  
Temperature 0°C to +50°C (32°F to 122°F)
Power supply 10 to 30 VDC, max. 60 VA Available for external devices: 55 VA
Environment class IP 30
Housing Base: PPO (UL 94 V-0) Upper: Polycarbonate (UL 94 V-0)
Color White
Dimensions WxHxD: 232 x 90 x 63 mm (9.13 x 3.54 x 2.48 in.)
Weight Approx. 0.53 kg (1.17 lb)
Type Rail mounting