APS-PSU-60 Power supply unit

APS-PSU-60 Power supply unit

  • Supports 12 V/7 Ah, 12 V/14 Ah and 24 V/7 Ah batteries
  • Selectable 12 VDC or 24 VDC voltage output
  • Selectable 5 A @ 12 VDC or 2.5 A @ 24 VDC current output
  • Overvoltage protection
  • Regulates battery charging voltage

The PSU-60 is a power supply unit with an integrated battery charging device.

 
Output voltage: 12V mode 24V mode , 10-15V 20-30V
Output current: 12V mode 24V mode , max 5A max. 2.5A
Output power: 60 W (constant)
Over voltage protection at: 12V mode 24V mode , 16.5V 33V
   
Input voltage: AC 100-240V~, 50-60Hz
Input current (AC): Max. 2A, to the specified max. load at 85 VAC
Input protection in case of a failure, the primary voltage is cut off from the power supply by a fuse.  
   
Output voltage: 12V mode 24V mode , 10-15V 20-30V
Output current for charging the battery: 12V mode 24V mode , 700mA * 350mA †
* according to battery capacity 14Ah† according to battery capacity 7Ah  
Periodic battery checks – approx. every 5 minutes.  
Protection from total battery discharge: 12V mode 24V mode , 9.5V 19V
The power supply switches to normal operation as soon as the AC incoming voltage has normalized.  
Temperature equalization is performed by an external NTC resistor.  
Reverse polarity protection.  
   
Working temperature (UL installations only): 0°C to 49°C (32°F to 120°F)
Storage temperature: -40°C to 85°C (-40°F to 185°F)
Relative humidity: 5% to 95%