FAS-420-TM Series Aspirating Smoke Detectors LSN improved version

FAS-420-TM Series Aspirating Smoke Detectors LSN improved version

  • For connecting to the fire panels FPA-5000 and FPA‑1200 with LSN improved technology
  • High deceptive alarm immunity with intelligent signal processing LOGIC·SENS
  • Innovative fire source identification technology allows the exact location of the fire to be pinpointed by monitoring up to five distinct zones
  • Innovative airflow monitoring including single-hole monitoring detects obstruction and breakage
  • Installation and commissioning made easy by plug-and-play function
  • Easy to diagnose using FAS‑ASD‑DIAG Diagnostic Software
  • Simple implementation of the pipe system planning through patented Aspiration reducing Film Sheets
  • Preservation of LSN loop functions in the event of wire interruption or short-circuit through two integrated isolators

The FAS‑420‑TM Series Aspirating Smoke Detectors are specially designed for direct connection to the Local SecurityNetwork improved version with the extended range of features. These active fire detection systems are for early fire detection in zone and equipment protection, as well as for the monitoring of air-conditioning units or ducts. The exact location of the fire can be pinpointed using the innovative fire source identification. The aspirating smoke detectors are fitted with the latest fire detection technology. Their resistance to contamination, the temperature compensation of the sensor signals and initialization in relation to air pressure ensure reliable operation even under difficult environmental conditions.

   
LSN power supply 15 V DC . . 33 V DC
Auxiliary power supply 15 V DC . . 30 V DC
LSN current consumption 6.25 mA
Current consumption from auxiliary power supply Fan voltage
9 V 10.5 V , 12 V
- Starting current 150 mA , 150 mA , 150 mA
- In standby 105 mA , 125 mA , 145 mA
- With alarm, device variants FAS‑420‑TM and FAS‑420‑TM‑R 110 mA , 130 mA , 150 mA
- With alarm, device variant FAS‑420‑TM‑RVB 140 mA , 160 mA , 180 mA
Displays on the device  
FAS‑420‑TM FAS‑420‑TM‑R , FAS‑420‑TM‑RVB
Operation Green LED , Green LED , Green LED
Malfunction Yellow LED , Yellow LED , Yellow LED
Alarm Red LED , Red LED , 2 red LEDs (pre-alarm and main alarm)
Fire location display - , 5 red LEDs (zones A-E) , 5 red LEDs (zones A-E)
Smoke level display - , - , Yellow smoke level display with 10 segments (1-10)
Infrared port IR transmitter/receiver , IR transmitter/receiver , IR transmitter/receiver
   
Conical duct connections Ø 25 mm 1x aspiration pipe 1x air return
Aspiration pipe 1 pipe
Air return 1 pipe
Cable bushings:  
Housing base sides 8 x M 20 and 2 x M 25
Housing base rear wall 4 x M 25
Dimensions (W x H x D) 140 x 222 x 70 mm
Weight Approx. 0.8 kg
Housing material Plastic (ABS)
Housing color Papyrus white (RAL 9018)
Protection category according to EN 60529  
Without air return IP 20
With pipe section 100 mm/pipe bend IP 42
With air return IP 54
Permissible temperature range:  
FAS‑420‑TM series Aspirating Smoke Detector -20 °C to +60 °C
PVC pipe system 0 °C to +60 °C
ABS pipe system -40 °C to +80 °C
Permissible relative humidity (non-condensing) Max. 95%
   
Sound power level (at 9 V fan voltage) EN27779, 1991 40 dB(A)
Response sensitivity (light obscuration) 0.5 to 2.0%/m
Life cycle of fan (at 12 V and 24 °C) 60,000 hrs