B450 Plug-in Communicator Interface

B450 Plug-in Communicator Interface

  • Enables full two-way IP communication using Plug-in Cellular Communicators
  • Plug and Play installation makes future radio technology changes easy
  • Compatible with new and most deployed Bosch control panels
  • Supports remote installation of cellular modules for improved signal

The B450 Conettix Plug-in Communicator Interface is a four-wire powered SDI2, SDI, or option bus device that provides two-way communication with compatible control panels over commercial cellular networks using a plug-in communicator (available separately).

Current (operating) Standby: B450 with B440/B441/B442/B443 = 60 mA Alarm: B450 with B440/B441/B442/B443 = 180 mA
Voltage (operating) (B450 bus operation): 12 VDC nominal
Relative humidity Up to 93% at +32°C (+90°F) non-condensing
Operating temperature 0°C to +50°C (+32°F to +122°F)
Board dimensions 79 mm x 128 mm x 38 mm (3.11 in x 5.03 in x 1.50 in)
Data bus wire gauge 12 AWG to 22 AWG
USB cable USB cable (Type A to A male-to-male) – not supplied
Data bus wire length Maximum Distance – wire size: 22 AWG (0.65 mm) --> 12 m (40 ft) 18 AWG (1.0 mm) --> 30 m (100 ft) 16 AWG (1.3 mm) --> 48 m (158 ft) 12 AWG (2.0 mm) --> 122 m (400 ft) Using a separate power supply, such as the B520 Auxiliary Power Supply Module , connected to the B450 within the specification listed above, the wire distance can be extended up to 300 m (1000 ft)