VP-RS2BLNX SERIAL TO BILINX CONVERTER @0

VP-RS2BLNX SERIAL TO BILINX CONVERTER @0

  • RS-232 and RS-485 to Bilinx converter
  • Compatible with Dinion, DinionXF, Autodome cameras
  • Robust design
  • Wide-range power supply

The VP-RS2BLNX is a protocol converter that allows the integration of remotely accessible cameras for control and set-up into an (existing) RS-232 or RS-485 infrastructure. When connected to Bosch cameras with Bilinx capabilities, the VP-RS2BLNX converts RS-232 or RS-485 messages into Bilinx communication data. In this way, Bosch cameras with Bilinx can be controlled directly from computers, digital recorders or video management systems. The VP-RS2BLNX is suitable for use with Dinion, DinionXF and all Bilinx-enabled AutoDome cameras. Applications typically include Traffic Management systems and Video Content Analysis systems where the camera performance needs to be optimized during operation.

   
Power 12-28 VAC (50/60 Hz) and 12-40 VDC (polarity independent). Galvanically insulated from video, RS-232 ground and casing.
Speed  
RS-485 9600 baud
RS-232 9600 or 4800 baud selectable
Video connectors BNC connections, passive loop through, high impedance, Video input 1 Vpp nominal, 2 Vpp max.
Protocol The serial protocol is described in the Serial Protocol Description. This document is available upon request from Bosch Security Systems.
Dimensions(L x W x H) 88.5x100x28 mm (3.38x3.94x1.1 inch)
Temperature range  
Operating/storage -20 °C to +50 °C (-4 °F to 122 °F)
   
Min. Typ. , Max. , Unit
Power supply input voltage AC 10.8 , - , 28 , V
Power supply input voltage DC 10.8 , - , 40 , V
Power consumption - , 1.3 , 2 , W
RS-232  
Input voltage operating range -24 , - , 24 , V
Input logic threshold LOW 0.8 , 1.2 , - , V
Input logic threshold HIGH - , 1.7 , 2.4 , V
Input hysteresis 0.2 , 0.5 , 1 , V
Input resistance 3 , 5 , 7 , Kohm
Output voltage swing(with 3 kOhm load) -7.8 , - , 7.8 , V
Output resistance 400 , - , - , ohm
Data rate 4.8 , 9.6 , - , Kbits/s
RS-485  
Input voltage operating range -7 , 12 , V
Differential input logic threshold LOW - , -0.2 , - , V
Differential input logic threshold HIGH - , 0.2 , - , V
Differential input hysteresis - , 70 , - , mV
Input resistance 24 , - , - , Kohm
Differential output (no load) - , - , 5 , V
Common-mode output (load = 50 ohm) - , - , 3 , V
Data rate - , 9.6 , - , Kbit/s