The D7412GV3 Control Panel delivers a powerful new solution for intrusion, access control, and fire alarm system applications. The control panel includes a communicator that sends event reports to selected public switched telephone network (PSTN), IP network, or general packet radio service (GPRS) destinations through four programmable route groups. The control panel provides up to 75 individually identified points. Each point: • Accommodates normally‑open (NO) and normally‑closed (NC) devices with end‑of‑line (EOL) resistor supervision • Is programmable for fire, fire supervisory, or intrusion applications. With the D7412GV3 you can: • Monitor alarm points for intruder or fire alarms while operating user keypads and other outputs • Program all system functions locally or remotely (attended or unattended) through Remote Programming Software (RPS); pro-gram critical parameters on site through a keypad. • Add up to two doors of access control using the optional D9210BLC Access Control Interface Module.
SDI Bus A (+): | 9 VDC 4572 m (15,000 ft) |
SDI Bus B (-): | 9 VDC 4572 m (15,000 ft) |
Telephone Connection: | One telephone line D928 Dual Phone Line module required for two telephone lines |
Current Draw (Maximum): | 300 mA |
Output (Alarm): | 2 A at 12 VDC |
Output (Auxiliary, Continuous Power, and Switched Auxiliary combined): | 1.4 A at 12 VDC nominal |
Voltage (Operating): | 12 VDC nominal |
Voltage (AC): | 16.5 VAC 40 VA plug‑in transformer (D1640) |
Relative Humidity: | 5% to 93% at +30°C (+86°F), non‑condensing |
Temperature (Operating): | 0°C to +50°C (+32°F to +122°F) |
Areas: | 8 |
Card Readers (Doors): | 2 |
Credentials (Tokens): | 396 |
Custom Functions: | 4 |
Events: | Store up to 1,000 |
Parallel Printers: | 1 |
Passcode Users: | 99, plus 1 service passcode |
Points: | 75 (8 on‑board, up to 67 off‑board) |
Programmable Relay Outputs: | 67 |
RF Points: | 67 |
SKEDs: | 40 |
Inovonics is a trademark of Inovonics Wireless Corporation. |