LECTUS duo 3000 EV1 line

LECTUS duo 3000 EV1 line

  • Two interfaces – RS485 and Wiegand.
  • For use with MIFARE classic and EV1 cards and key-fobs.
  • IP65 rated for indoor and outdoor use
  • Wall or mullion mount
  • Tamper switch

The LECTUS duo 3000 DESFire EV1 line consists of two readers for MIFARE classic and EV1 cards and transponders. They support the data record of Bosch coded MIFARE credentials and the CSN of ISO14443A cards as well.

Electrical characteristics  
Input voltage 8.5 V to 16 Vdc - max. 18 Vdc
Current draw 65 mA @ 12 Vdc Max.: 130 mA @ 12 Vdc
Operational Characteristics  
Tamper output Open collector, active low, 32 mA max sink current. Optical Technology
Wiegand D0 output 5 V (TTL)
Wiegand D1 output 5 V (TTL)
Green LED control input Active low
Red LED control input Active low
Buzzer control input Active low
RS485 OSDP protocol
Wiegand IF D0/D1 Wiegand protocol
Keypad LECTUS duo 3000 E: none LECTUS duo 3000 EK: 2x6
Environmental Characteristics  
Operating environment Indoor and outdoor use - all weather.
Operating temperature -25 °C to 65 °C (-13 °F to 150 °F)
Operating humidity 0 to 95% (Non-condensing)
IP rating IP65
UV-light resistant Yes
Vandal resistance IK08
MIFARE & Cards Specification  
Read range - ISO cards > 3 cm (1.18 in.)
Key fob > 2 cm (0.78 in.)
Supported cards MIFARE 13.56 MHz ISO 14443 Type A
Anti-Collision support Yes
NXP Chips supported MF3ICD21 - 2K MF3ICD41 - 4K MF3ICD81 - 8K
MIFARE MAD, CSN Support  
The reader follows the MAD rules  
Reads INIT CSN Yes
Reads CSN after non-detection of MAD information Yes
Physical Characteristics  
Dimensions (L x W x D) 137 mm x 44 mm x 27.5 mm (5.39 in. x 1.73 in. x 1.08 in.)
Weight Approx. 220 g (0.5 lb)